[Skip to Content]
Countries

Find local office

Visit local website

Products

The products listed below is the portfolio of North America, please check the availability of the chosen product in your country with your local sales executive.

HEMPEL'S MARINE VARNISH 02220

Is a quick-drying clear urethane alkyd varnish.

HEMPELS CLEAR COAT 051US

His a two-component, high solids, high gloss enamel with excellent gloss retention

HEMPALINE PREPARE 110

is a high performance Epoxy concrete sealer which exhibits outstanding adhesion to concrete as well as the chemical resistant topcoats

HEMPEL'S THINNER 08080

Blended to give the best results with regard to brush ability, spray properties

HEMPEL's THINNER 08230

are blended to give the best results with regard to brush ability, spray properties, etc.

HEMPEL'S THINNER 08450

HEMPEL’S THINNERS are blended to give the best results with regard to brush ability, spray properties, etc.

HEMPEL'S THINNER 08630

HEMPEL PAINT is produced and supplied in such a way that thinning is normally not necessary
provided the paint is properly mixed/stirred. HEMPEL’S THINNERS are blended to give the best results with regard to brush ability, spray
properties, etc.

HEMPELS THINNER 08700

HEMPEL’S THINNERS are blended to give the best results with regard to brush ability, spray
properties, etc.

HEMPEL'S THINNER 08960

HEMPEL’S THINNERS are blended to give the best results with regard to brush ability, spray
properties, etc.

HEMPALIN PRIMER 12050

A relatively quick-drying, zinc phosphate primer for steel

HEMPADUR 15130

A two-component, polyamide cured coal tar epoxy which provides a very hardwearing coating, highly resistant to seawater and mineral oils. Limited resistance to a number of solvents.

CHEM-O-PON LOW VOC EPOXY PRIMER

two component polyamide cured, high solids, and high build epoxy.

HEMPADUR 15500

A two-component, amine adduct cured phenolic epoxy (novolac) paint.

HEMPELS GALVOSIL 15670

A two-component, medium-zinc, solvent-borne, self-curing inorganic zinc silicate coating.

HEMPELS GALVOSIL 15680

A two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.

HEMPEL'S GALVOSIL 15700

A two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.

HEMPEL'S SHOPPRIMER ZS 15890

A two-component, low-zinc, solvent-borne ethyl silicate shopprimer.

UREPRIME PRIMER-SURFACER 158JB

non-chrome containing fast dry primer-surfacer

HEMPELS PHENOLIC EPOXY 163US

A modified, phenolic epoxy which must be cured at high temperatures. It has excellent resistance to alkali and caustic solutions, solvents, alcohol, detergent, and hot and cold water.

HEMPEL'S ZINC PRIMER 16490

A one-component, high Molecular weight, quick drying, phenoxy coating with a high content of zinc.

HEMPALINE PREPARE 120

is a two-component vinyl ester primer. This material exhibits outstanding adhesion to steel and concrete as well as the chemical resistant topcoats

HEMPALINE DEFEND 740

Hempaline Defend 740 is a two-component, sprayable high performance novolac glass flake vinyl ester tank lining.

Hempaline Defend 500

Hempaline Defend 500 is a two-component, sprayable high performance acid resistant flake filled vinyl ester tank lining.

HEMPADUR PRIMER HB 17300

A two-component, high build, polyamide-cured epoxy prime, containing zinc phosphate as corrosion inhibiting pigment.

HEMPADUR AVANTGUARD 550

A two-component, activated zinc epoxy primer in compliance with the requirements for Level 3, type II in SSPC Paint 20, 2002. Can utilize ASTM D520, type II zinc dust.

HEMPADUR ZINC 17360

A two-component zinc rich epoxy primer.

HEMPADUR AvantGuard 750

A two-component, activated zinc epoxy primer in compliance with the requirements in ISO 12944 Part 5, 2007 and Level 2, type II in SSPC Paint 20, 2002. Can utilize ASTM D520, type II zinc dust.

HEMPADUR FAST DRY 17410

A two-component, high build epoxy paint. Contains zinc phosphate.

HEMPADUR 17630

A two-component,high-build, plyamide adduct-cured epoxy paint.

HEMPADUR 17633

A two-coponent, high-build, plyamide adduct-cured epoxy paint.

HEMPADUR QUATTRO 17634

Is a two-component universal epoxy paint, which cures to a hard and tough coating with good resistance to abrasion, seawater and various oils.

HEMUCRYL PRIMER HI-BUILD 18032

is a water-borne, acrylic dispersion paint with good anticorrosive properties.

HEMPEL’S PRIMER 180AM

is a water-borne paint based on acrylic dispersion with good anticorrosive properties

HEMUCRYL PRIMER 18100

is a waterborne, acrylic dispersion paint. Especially suited for application by brush/roller

HEMPEL'S EPOXY FILLER 35250

A two-component, solvent-free, epoxy filler, which when fully cured - is resistant to water, aliphatic hydrocarbons and related products.

Can be applied in thick coats up to approximately 5 mm without runs or sags.

HEMPEL'S EPOXY 35480

Is a two-component, modified, high-solids epoxy specially formulated as a lining in hopper cars. It forms a tough, abrasion-resistant coating with exceptional flexibility and chemical resistance.

HEMPEL’S EPOXY 3548H

is a two-component, rubber modified, high-solids epoxy specially formulated as a highly flexible epoxy coating

HEMPADUR MULTI-STRENGTH 35530

is a solvent-free, two-component, high-build, polyamine cured epoxy paint, which cures to a coating with good resistance to fresh water, sea water, crude oil, and to abrasion

HEMPADUR EM 35740

is a two-component, ultra high solids and very low VOC epoxy coating

HEMPADUR 35900

Is a solvent-free, high-build amine-cured phenolic epoxy (novolac) coating, has excellent adhesive properties and is resistant to crude oil/water up to 93°C/200°F.

HEMPADUR FX4 37300

Is an amine-cured, solvent-free epoxy coating which cures to a strong and smooth lining.is an amine-cured, solvent-free epoxy coating which cures to a strong and smooth lining.

HEMPADUR BPA FREE 37301

Is an amine-cured, solvent-free epoxy coating which cures to a strong and smooth lining. It is Bisphenol A epoxy resin free and comply fully with the Federal Food, Drug, and Cosmetic Act and all applicable food additive regulations, including 21 C.F.R. § 175.300 (“Resinous and polymeric coatings”)

HEMPALINE PREPARE 170

is a two-component, moisture-tolerant, epoxy novolac elastomer with excellent chemical resistance and physical properties

VERSILINE SEALANT 55MT

A two-component, moisture-tolerant, epoxy novolac elastomer.

HEMPEL´S EPOXY 374US

A high build, HAPs and VOC compliant, two-component polyamine-cured epoxy paint.

HEMPALINE DEFEND 400 CURE 24

is a solvent free, high performance epoxy lining with very good chemical resistance

HEMPALINE DEFEND 630 CURE 72

Hempaline Defend 630 is a solvent free high performance Epoxy Phenolic Lining with excellent chemical resistance to a wide range of chemicals and solvents.

HEMPALINE DEFEND 630 CURE 24

is a solvent free high performance Epoxy Phenolic Lining with excellent chemical resistance to a wide range of chemicals and solvents

HEMPALINE DEFEND 640 CURE 72

Hempaline Defend 640 is a solvent free high performance Glass Flake Epoxy Phenolic Llining with
excellent chemical resistance to a wide range of chemicals and solvents

HEMPALINE DEFEND 640 CURE 24

Hempaline Defend 640 is a solvent free high performance Glass Flake Epoxy Phenolic Lining with
excellent chemical resistance to a wide range of chemicals and solvents.

HEMPELS NON-SKID 418US

An acrylic coating with anticorrosive pigments. Physically drying. Resistant to salt water, splashes of mineral oils, aliphatic solvents, petrol, and a wide range of chemicals but not to animal and vegetable oils or aromatic solvents.

HEMPALINE DEFEND 645

is a two component sprayable high build Novolac epoxy tank lining system with excellent resistance range of high concentrated acids, strong caustic solutions and
other organic chemicals

VERSILINE TL-45 S

A two component sprayable high build novolac epoxy tank lining.

VERSILINE TL-91 S

A two-component, high performance flake-filled novolac epoxy.

HEMPALIN UNDERCOAT 42460

A fairly quick-drying alkyd paint. As a general purpose undercoating in alkyd paint systems on exterior and interior steelwork, wood, plaster, etc. in mildly to moderately corrosive environment.

HEMPACORE ONE 43600

is a one component, solvent-borne, physically drying intumescent coating
for passive fire protection of structural steel against cellulosic fires.

HEMPACORE ONE FD 43601

HEMPACORE ONE FD 43601 is a one component, solvent-borne, physically drying intumescent
coating for passive fire protection of structural steel against cellulosic fires. It is suitable for in-shop and
on-site applications.

HEMPADUR 45150

Is a two-component,high solids,polyamine cured epoxy paint with good self-priming properties.

HEMPALINE DEFEND 660

A sprayable flexible epoxy lining system

HEMPADUR MULTI-STRENGTH 45751

Is a self-priming, two-component, highbuild, epoxy-polyamide/amine paint which cures to an abrasion and corrosion resistant coating. HEMPADUR MULTI-STRENGTH 45751 is intended for use in warm climates.

HEMPALINE DEFEND 690

is a Novolac epoxy coating used in secondary containment structures, concrete floors and other process applications which demand resistance to harsh chemicals and good durability

HEMPADUR MASTIC 45880

A two-component polyamide adduct cured, high solids, high build epoxy paint.

HEMPADUR MASTIC 45881

A two-compontent polyamide adduct cured, high solids, high build epoxy paint. It forms a hard and touch coating and good wetting properties.

HEMPADUR MASTIC 45883

Is a two-component polyamide adduct cured, high solids,high build epoxy paint.

HEMPATEX HI-BUILD 46410

A physically drying high build paint with good colour retention as a semi-flat finish. Based on acrylic resin, alkyd and non-chlorinated plasticizer.

HEMPADUR 47140

Is a two-component polyamide adducts cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time. VOC compliant.

HEMPADUR WIND 47171

is a two-component epoxy paint, which cures to a hard and tough coating with good resistance to abrasion and anti-corrosive properties

HEMPADUR 4774D

HEMPADUR 4774D is a self-priming, two-component, high-build, pure epoxy paint, polyamide/amine
cured. Abrasion and corrosion resistant.

HEMPAFIRE POOL 200

is a two-component epoxy based intumescent coating that provides passive fire protection of structural steel against hydrocarbon fires

HEMUCRYL 48132

a water-borne, acrylic dispersion paint with good anticorrosive properties. It dries to a non-yellowing coating with low dirt pick-up and good weathering properties.

HEMPALIN ENAMEL 52140

is a glossy alkyd enamel which forms a weather resistant coating

HEMPALIN ENAMEL 5214A

Is a glossy alkyd enamel which forms a weather resistantcoating. It is flexible and resistant to salt water and spillage of mineral oil and otheraliphatic hydrocarbons.

HEMPALIN ENAMEL 5214L

is a glossy alkyd enamel which forms a weather resistant coating.
It is flexible and resistant to salt water and spillage of mineral oil and other aliphatic
hydrocarbons

HEMPELS URETHANE 545US

a low-HAPS, high-gloss, two-component, aliphatic, clear polyurethane enamel with excellent gloss retention.

HEMPAXANE LIGHT 55030

A two-component, high-solids, high gloss polysiloxane enamel.

HEMPATHANE TOPCOAT 55210

HEMPATHANE TOPCOAT 55210 is a two-component, glossy acrylic polyurethane coating, cured with
aliphatic isocyanate, with good gloss and colour retention.
Maximum, dry exposure only: 120°C/248°F see REMARKS overleaf

Hempathane Topcoat 55213

A two-component, semi-gloss acrylic polyurethane coating with good gloss and color retention.

HEMPATHANE TOPCOAT 55214

a two-component, semi-gloss acrylic polyurethane coating with good gloss and colour retention.

HEMPEL'S PREPREP 553US

A solvent-free low molecular weight amine-cured epoxy with superior penetrating properties. It cures to a tough water resistant coating while providing adhesion of subsequent coatings

HEMPEL'S EPOXY 554US

is a high solids, two-component, polyamide-cured, epoxy product. It forms a tough, hard wearing coating with good resistance to water and petroleum products

HEMPATHANE HS 55610

A two-component polyurethane topcoat with good gloss and color retention.

HEMPATHANE HS 55613

A two-component semi-gloss acrylic polyurethane topcoat.

HEMPATHANE HS 5561B

is a two-component polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.

HEMPEL'S URETHANE 5595U

Is high gloss, two-component, aliphatic polyurethane enamel with excellent gloss and colour retention.

Hempatop Finish 620

A high gloss, two-component, acrylic urethane enamel with excellent gloss and color retention.

HEMPEL'S SILICONE ALUMINIUM 56913

a heat resistant aluminum pigmented polysiloxane paint.

Hempel's Silicone Acrylic 56940

a heat resistant acrylic modified polysiloxane paint. It is air drying at ambient temperature.

VERSILINE 56990

is a MIO pigmented single component inorganic copolymer coating which cures to form an inert polymer matrix able to resist temperatures up to 650°C/1202°F and thermal shock/cycling in dry or dry/wet service.

HEMPATOP DIRECT 650

is a high build direct-to-metal polyaspartic formulated for spray applications in areas requiring quick curing and manageable working time.

HEMPATOP DIRECT 650 57400

is a two component, high build direct to metal polyaspartic formulated for spray applications in areas requiring quick curing with a manager working time.

HEMPEL’S QUICK DRY ALKYD ENAMEL 57CUS

Is a very fast dry enamel sometimes referred to as oilfield or shop coat enamel. ONLY available in Canada

HEMPELS ANTI CONDENS 617US

a water-based, moisture-absorbing coating. It is alight material with high water-absorbing capacity.

HEMPELS PU ACCELERATOR 627US

a special additive, designed to accelerate drying and curing of HEMPEL'S URETHANE 5595U when
circumstances require.

HEMPEL’S ACCELERATOR 628US

is a special additive, designed to accelerate drying and curing of HEMPEL'S epoxies when circumstances require such.

QUICKCLEAN™ HS2 POLYURETHANE 647J2

is a two component polyurethane topcoat
specially formulated for use in applications requiring anti-graffiti, non-stick, and high surface slip
characteristic uses. It is offered for use in areas requiring VOC’s less than 2.8 pounds/gallon

HEMPEL'S POWDER 67810

is a Chemically Inert filler which is used as part of a three component system
(Part A, Curing Agent and Hempel's 67810 Powder). The mixed material may be used as a chemically
resistant caulk or trowel applied topcoat/base coat

HEMPEL'S THINNER 821US

HEMPEL’S THINNERS are blended to give the best results with regard to brushability, sprayproperties, etc.

HEMPADUR 85530

is an amine-adduct, cured epoxy coating

HEMPADUR 85531

is an amine-adduct, cured epoxy coating

HEMPADUR 85671

A two-component amine-adduct cured phenolic epoxy (novolac).

HEMPEL'S THINNER 857US

HEMPEL’S THINNERS are blended to give the best results with regard to brushability, spray properties, etc.

HEMPEL'S WATERBORNE ACRYLIC 877US

A high performance waterborne acrylic enamel

HEMPEL`S-HS-GAS-PIPE-COATING-87831

is a two-component epoxy polyamine cured coating.
Formulated according to the requirements in AMERICAN PETROLEUM INSTITUTE’S STANDARD RP 5L2.

HEMPEL'S LIGHT CLEAN 99350

Is a solvent-free concentrated alkaline cleaner based on emulsifiers, surface-active agents and water.

HEMPEL'S TOOL CLEANER 99610

A blend of strong solvents for cleaning of tools that have been used for mixing or applying two-component epoxy products.

Contact

For further information please, contact us at

Product finder