[Skip to Content]
HEMPEL NORTH AMERICA

Product list

The products listed below are some of the Hempel's assortment for North America. Please check the availability of the chosen products in your country with your local sales executive.

HEMPEL'S MARINE VARNISH 02220

Is a quick-drying clear urethane alkyd varnish.

HEMPELS CLEAR COAT 051US

HEMPEL’S CLEAR COAT 051US is a two-component, high solids, high gloss enamel with excellent gloss retention.

HEMPEL'S HI-VEE LACQUER 06520

A non-hiding, but strongly day-light reflecting acrylic paint with fluorescent
pigments which give intense colour impression and high visibility (HIVEE).

HEMPEL'S THINNER 08080

Blended to give the best results with regard to brushability, spray properties.

HEMPEL's THINNER 08230

HEMPEL’S THINNERS are blended to give the best results with regard to brush ability, spray properties, etc.

HEMPEL'S THINNER 08450

HEMPEL’S THINNERS are blended to give the best results with regard to brush ability, spray properties, etc.

HEMPELS THINNER 08700

HEMPEL’S THINNERS are blended to give the best results with regard to brush ability, spray
properties, etc.

HEMPALIN PRIMER 12050

A relatively quick-drying, zinc phosphate primer for steel.

HEMPELs UNI-PRIMER 13140

A quick-drying, one-component primer with rust-inhibiting pigments.

HEMPEL'S RADIATOR COATING 134US

Is an epoxy-ester coating designed for dip or flow application on finned heat exchangers.

HEMPADUR 15130

A two-component, polyamide cured coal tar epoxy which provides a very hardwearing coating, highly resistant to seawater and mineral oils. Limited resistance to a number of solvents.

HEMPADUR 15500

A two-component, amine adduct cured phenolic epoxy (novolac) paint.

HEMPELS GALVOSIL 15650

A two-component, medium-zinc, solvent-borne, self-curing inorganic zinc silicate coating.

HEMPELS GALVOSIL 15670

A two-component, medium-zinc, solvent-borne, self-curing inorganic zinc silicate coating.

HEMPELS GALVOSIL 15680

A two-component, solvent-borne, self-curing, inorganic zinc silicate with outstanding resistance against weathering and abrasion.

HEMPEL'S SHOPPRIMER ZS 15890

A two-component, low-zinc, solvent-borne ethyl silicate shopprimer.

HEMPELS PHENOLIC EPOXY 163US

A modified, phenolic epoxy which must be cured at high temperatures. It has excellent resistance to alkali and caustic solutions, solvents, alcohol, detergent, and hot and cold water.

HEMPEL'S ZINC PRIMER 16490

A one-component, high Molecular weight, quick drying, phenoxy coating with a high content of zinc.

HEMPEL'S SILICONE ZINC 16900

A heat resistant zinc pigmented silicone primer.

HEMPADUR PRIMER HB 17300

A two-component, high build, polyamide-cured epoxy prime, containing zinc phosphate as corrosion inhibiting pigment.

HEMPADUR ZINC 17340

A two-component zinc rich epoxy paint. It cures to a strong and corrosion resistant coating.

HEMPADUR ZINC 17360

A two-component zinc rich epoxy primer.

HEMPADUR FAST DRY 17410

A two-component, high build epoxy paint. Contains zinc phosphate.

HEMPADUR 17630

A two-component,high-build, plyamide adduct-cured epoxy paint.

HEMPADUR 17633

A two-coponent, high-build, plyamide adduct-cured epoxy paint.

HEMPADUR QUATTRO 17634

Is a two-component universal epoxy paint, which cures to a hard and tough coating with good resistance to abrasion, seawater and various oils.

HEMUCRYL PRIMER HI-BUILD 18032

HEMUCRYL PRIMER HI-BUILD 18032 is a water-borne, acrylic dispersion paint with good
anticorrosive properties.

HEMUCRYL 18050

A water-borne paint based on acrylic dispersion with good anticorrosive properties.

HEMUCRYL PRIMER 18100

HEMUCRYL PRIMER 18100 is a waterborne, acrylic dispersion paint. Especially suited for application by brush/roller.

HEMUCRYL TI-COAT 18200

Is a water-borne acrylic dispersion paint with good adhesive properties.

HEMPASIL NEXUS 27302

HEMPASIL NEXUS 27302 is a high solid three component silicone based product.

HEMPEL'S EPOXY FILLER 35250

A two-component, solvent-free, epoxy filler, which when fully cured - is resistant to water, aliphatic hydrocarbons and related products.

Can be applied in thick coats up to approximately 5 mm without runs or sags.

HEMPEL'S EPOXY 35480

Is a two-component, modified, high-solids epoxy specially formulated as a lining in hopper cars. It forms a tough, abrasion-resistant coating with exceptional flexibility and chemical resistance.

HEMPADUR MULTI-STRENGTH 35530

is a solvent-free, two-component, high-build, polyamine cured epoxy paint, which cures to a coating with good resistance to fresh water, sea water, crude oil, and to abrasion. Applicable in thick coats by standard heavy duty airless spray equipment.

HEMPADUR 35900

Is a solvent-free, high-build amine-cured phenolic epoxy (novolac) coating, has excellent adhesive properties and is resistant to crude oil/water up to 93°C/200°F.

HEMPADUR FX4 37300

Is an amine-cured, solvent-free epoxy coating which cures to a strong and smooth lining.is an amine-cured, solvent-free epoxy coating which cures to a strong and smooth lining.

HEMPADUR BPA FREE 37301

Is an amine-cured, solvent-free epoxy coating which cures to a strong and smooth lining. It is Bisphenol A epoxy resin free and comply fully with the Federal Food, Drug, and Cosmetic Act and all applicable food additive regulations, including 21 C.F.R. § 175.300 (“Resinous and polymeric coatings”)

HEMPEL´S EPOXY 374US

A high build, HAPs and VOC compliant, two-component polyamine-cured epoxy paint.

HEMPADUR 37620

HEMPADUR 37620 is a two-component, amine cured phenolic epoxy paint, which cures
to provide excellent resistance to acidic environments.
Recommended use: For corrosion protection of steel in atmospheric acidic environments such as
electrowinning plants, coking works, pickling shops, electroplating plants, dye mills,
wood-pulp works, tanneries and oil refineries. Not intended for continuous contact or
immersion with acidic solutions.
Service temperatures: Ambient temperature in acidic environments.

HEMPEL'S HI SOLIDS EPOXY 376US

A high-solids, two-component, high-build, polyamine cured epoxy paint especially designed for application by heated, heavy-duty plural component, airless spray equipment.

HEMPELS NON-SKID 418US

An acrylic coating with anticorrosive pigments. Physically drying. Resistant to salt water, splashes of mineral oils, aliphatic solvents, petrol, and a wide range of chemicals but not to animal and vegetable oils or aromatic solvents.

HEMPALIN UNDERCOAT 42460

A fairly quick-drying alkyd paint. As a general purpose undercoating in alkyd paint systems on exterior and interior steelwork, wood, plaster, etc. in mildly to moderately corrosive environment.

HEMPEL'S EPOXY 438US

HEMPEL'S EPOXY 438US is a two-component, amine adduct-cured epoxy with a high solids content. It forms a very hard-wearing coating that is resistant to a wide range of chemicals. .

HEMPADUR 45150

Is a two-component,high solids,polyamine cured epoxy paint with good self-priming properties.

HEMPADUR 45182

is a two-component, low-temperature curing, modified polyamide adduct cured epoxy.

HEMPADUR MULTI-STRENGTH 45540

is a two component pure epoxy paint which cures to an abrasion and corrosion resistant coating. Well suited for application under humid conditions and for early water exposure.

HEMPADUR MULTI-STRENGTH 45751

Is a self-priming, two-component, highbuild, epoxy-polyamide/amine paint which cures to an abrasion and corrosion resistant coating. HEMPADUR MULTI-STRENGTH 45751 is intended for use in warm climates.

HEMPADUR MASTIC 45880

A two-component polyamide adduct cured, high solids, high build epoxy paint.

HEMPADUR MASTIC 45881

A two-compontent polyamide adduct cured, high solids, high build epoxy paint. It forms a hard and touch coating and good wetting properties.

HEMPADUR MASTIC 45883

Is a two-component polyamide adduct cured, high solids,high build epoxy paint.

HEMPADUR 47140

Is a two-component polyamide adducts cured, high build epoxy paint which combines a relatively high volume solids content with a short drying time. VOC compliant.

HEMPADUR 47183

An anticorrosive two-component, modified polyamide adduct cured epoxy.

HEMUCRYL 48100

A water-borne paint based on acrylic dispersion with good anticorrosive properties.

HEMUCRYL 48132

a water-borne, acrylic dispersion paint with good anticorrosive properties. It dries to a non-yellowing coating with low dirt pick-up and good weathering properties.

HEMPALIN ENAMEL 52140

HEMPALIN ENAMEL 52140 is a glossy alkyd enamel which forms a weather resistant coating.

HEMPALIN ENAMEL 5214A

Is a glossy alkyd enamel which forms a weather resistantcoating. It is flexible and resistant to salt water and spillage of mineral oil and otheraliphatic hydrocarbons.

HEMPELS URETHANE 545US

a low-HAPS, high-gloss, two-component, aliphatic, clear polyurethane enamel with excellent gloss retention.

HEMPAXANE LIGHT 5503A

a two-component, high-solids, high-gloss, plysiloxane enamel with execellent gloss and colour retention.

HEMPATHANE TOPCOAT 55214

a two-component, semi-gloss acrylic polyurethane coating with good gloss and colour retention.

HEMPEL's PREPREP 553US

a solvent-free low molecular weight amine-cured epoxy with superior penetrating properties. It cures to a tough water resistant coating while providing adhesion of subsequent coatings.

HEMPEL'S EPOXY 554US

HEMPEL'S EPOXY 554US is a high solids, two-component, polyamide-cured, epoxy product. It forms a tough, hard wearing coating with good resistance to water and petroleum products.

HEMPATHANE HS 55610

A two-component polyurethane topcoat with good gloss and color retention.

HEMPATHANE HS 5561K

A two-component DTM polyurethane topcoat, cured with aliphatic isocyanate, with good gloss and colour retention.

HEMPELS URETHANE 5595D

HEMPEL'S URETHANE 5595D is a two-component, semi-gloss, aliphatic polyurethane
enamel with excellent gloss and color retention.

HEMPEL'S URETHANE 5595U

Is high gloss, two-component, aliphatic polyurethane enamel with excellent gloss and colour retention.

HEMPEL's URETHANE 559US

a high gloss, two-component, aliphatic polyurethane enamel with excellent gloss and colour retention. It is resistant to water, impact, and abrasion.

HEMPEL'S HIGH RESOLUTION TOPCOAT 55RUS

A premium, high solids urethane/polyester hybrid that offers outstanding chemical resistance and long lasting durability.

HEMPATEX ENAMEL 5636A

a finishing coat based on acrylic resin and non-chlorinated plasticizer for optimum gloss and colour retention. Physically drying.

HEMPEL'S SILICONE ALUMINIUM 56913

a heat resistant aluminum pigmented polysiloxane paint.

HEMUCRYL ENAMEL HI-BUILD 58030

Is a water-borne, acrylic dispersion based paint.

HEMPELS ANTI CONDENS 617US

a water-based, moisture-absorbing coating. It is alight material with high water-absorbing capacity.

HEMPEL'S ANTIFOULING OLYMPIC HI-76600

Is a tin-free ablative bottom paint, based on a polyamide polymer and containing cuprous oxide. NOT AVAILABLE IN CANADA

HEMPEL'S ANTIFOULING GLOBIC 81950

Is a high solids, tin-free, self-smoothening and self-polishing antifouling. Polishing is based on an ion exchange, resulting in a hydrolysable activated layer. An inorganic fibre reinforcement of the resin matrix ensures effective polishing control and mechanical strength.

HEMPEL'S THINNER 821US

HEMPEL’S THINNERS are blended to give the best results with regard to brushability, sprayproperties, etc.

HEMPADUR 85671

A two-component amine-adduct cured phenolic epoxy (novolac).

HEMPEL'S THINNER 857US

HEMPEL’S THINNERS are blended to give the best results with regard to brushability, spray properties, etc.

HEMPASIL X3 87500

A third generation fouling release coating with high solids content. The product is based on silicone, is biocide free and cures after addition of HEMPASIL CROSSLINKER 98950.

HEMPEL`S-HS-GAS-PIPE-COATING-87830

A two-component epoxy polyamine cured high solids gas pipe coating.

HEMPEL'S LIGHT CLEAN 99350

Is a solvent-free concentrated alkaline cleaner based on emulsifiers, surface-active agents and water.

HEMPEL'S TOOL CLEANER 99610

A blend of strong solvents for cleaning of tools that have been used for mixing or applying two-component epoxy products.

HEMPELS MEK TOOL CLEANER 99CUS

a tool cleaner for cleaning of tools that have been used for mixing or application of two-component products.

Contact

For further information please, contact us at

Product finder